DARDA - C2S
Splitting force: 195 t
Drill hole Ø : 31 - 32 mm
Drill depth : 270 mm
Bar pressure : 500 bar
Weight : 17 kg
Powerful and usable anywhere
Taking advantage of the low tensile strength of rock and concrete, the hydraulic splitting cylinders allow controlled, quiet and cost-effective demolition from the inside!
DARDA smallest cylinder model is predominantly used in the demolition of rock and natural stone during press pipe jacking. However, the C2 splitting unit is also suitable for secondary splitting of boulders, expansion in underground mining, knapping work, as well as block extraction of hard rock in the natural stone industry.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C4N
Splitting force: 230 tones
Drill hole Ø : 35 - 36 mm
Drill depth : 430 mm
Bar pressure : 500 bar
Weight : 21 kg
The Precise Splitting Device
By taking advantage of the low tensile strength of rock and concrete, the hydraulic splitting cylinders enable controlled, quiet and cost-effective demolition from the inside! The C4E splitting cylinder has a firm place in the natural stone industry for block extraction of hard and soft stone such as marble and granite. It is also used in the demolition of rock and natural stone, in the secondary crushing of boulders, as well as in tunnel driving, expansion in underground mining and slitting work, as well as in press pipe driving.
The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C4WL
Splitting force: 190 tones
Drill hole Ø : 35 - 38 mm
Drill depth : 540 mm
Bar pressure : 500 bar
Weight : 22 kg
The Precise Splitting Device
By taking advantage of the low tensile strength of rock and concrete, the hydraulic splitting cylinders enable controlled, quiet and cost-effective demolition from the inside! The C4E splitting cylinder has a firm place in the natural stone industry for block extraction of hard and soft stone such as marble and granite. It is also used in the demolition of rock and natural stone, in the secondary crushing of boulders, as well as in tunnel driving, expansion in underground mining and slitting work, as well as in press pipe driving.
The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C9N
Splitting force: 200 tones
Drill hole Ø : 45 - 48 mm
Drill depth : 410 mm
Bar pressure : 500 bar
Weight : 22 kg
The Precise Splitting Device
By taking advantage of the low tensile strength of rock and concrete, the hydraulic splitting cylinders enable controlled, quiet and cost-effective demolition from the inside! The C9 splitting cylinder is the world's most powerful splitting device in relation to its size. It is mainly used for demolishing concrete and reinforced concrete. Demolishing walls, masonry or chimneys in enclosed spaces, in hard-to-reach or narrow places is no problem. It reliably breaks unreinforced and lightly reinforced concrete - even underwater. When demolishing rocks and natural stone, it is ideal for secondary crushing of boulders, in tunnelling, expansion in underground mining, and press pipe driving. But it can also be used for trenching and digging work.
In the natural stone industry, it is often used for block extraction of sandstone. The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C9L
Splitting force: 200 tones
Drill hole Ø : 48 - 50 mm
Drill depth : 580 mm
Bar pressure : 500 bar
Weight : 23 kg
The Precise Splitting Device
By taking advantage of the low tensile strength of rock and concrete, the hydraulic splitting cylinders enable controlled, quiet and cost-effective demolition from the inside! The C9 splitting cylinder is the world's most powerful splitting device in relation to its size. It is mainly used for demolishing concrete and reinforced concrete. Demolishing walls, masonry or chimneys in enclosed spaces, in hard-to-reach or narrow places is no problem. It reliably breaks unreinforced and lightly reinforced concrete - even underwater. When demolishing rocks and natural stone, it is ideal for secondary crushing of boulders, in tunnelling, expansion in underground mining, and press pipe driving. But it can also be used for trenching and digging work.
In the natural stone industry, it is often used for block extraction of sandstone. The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C10S N
Splitting force: 260 tones
Drill hole Ø : 41 - 43 mm
Drill depth : 630 mm
Bar pressure : 500 bar
Weight : 33 kg
Powerful in seconds
Darda cylinder model, which is specially designed for natural stone extraction, was constructed precisely for the properties required there. The C10S splitting cylinder breaks all types of natural stone very precisely thanks to its high splitting force and is particularly suitable for block extraction.
A reduced diameter of the splitting insert allows for material-saving work. Particularly in this area of ​​the natural stone industry, the even distribution of force when using several C10S splitting cylinders in a row can achieve a very good splitting result. The C10S is ideal as a sliding cylinder for stuck, so-called "burned-on" blocks.
The splitting method does not cause hairline cracks in the stone, which can render the material unusable. The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C10S JURA
Splitting force: 220 tones
Drill hole Ø : 41 - 43 mm
Drill depth : 560 mm
Bar pressure : 500 bar
Weight : 32 kg
Powerful in seconds
Darda cylinder model, which is specially designed for natural stone extraction, was constructed precisely for the properties required there. The C10S splitting cylinder breaks all types of natural stone very precisely thanks to its high splitting force and is particularly suitable for block extraction.
A reduced diameter of the splitting insert allows for material-saving work. Particularly in this area of ​​the natural stone industry, the even distribution of force when using several C10S splitting cylinders in a row can achieve a very good splitting result. The C10S is ideal as a sliding cylinder for stuck, so-called "burned-on" blocks.
The splitting method does not cause hairline cracks in the stone, which can render the material unusable. The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C12N
Splitting force: 358 tones
Drill hole Ø : 45 - 48 mm
Drill depth : 610 mm
Bar pressure : 500 bar
Weight : 31 kg
Accurately controllable at any time
Darda largest handheld cylinder model is the world's most powerful splitting device in relation to its size. The C12 splitting cylinder breaks reinforced, lightweight and unreinforced concrete equally reliably and is particularly suitable for topping concrete piles and demolishing walls and walls.
The C12 splitting cylinder is particularly suitable for rock demolition and secondary crushing of boulders. Through multiple splits, the structure of a full-surface rock surface or rock area can be weakened and the rock can then be easily removed. In the natural stone industry, it is used for block extraction of hard rock, as well as in tunnel driving and for expansion work in underground mining.
The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C12L
Splitting force: 413 tones
Drill hole Ø : 45 - 48 mm
Drill depth : 680 mm
Bar pressure : 500 bar
Weight : 32 kg
Accurately controllable at any time
Darda largest handheld cylinder model is the world's most powerful splitting device in relation to its size. The C12 splitting cylinder breaks reinforced, lightweight and unreinforced concrete equally reliably and is particularly suitable for topping concrete piles and demolishing walls and walls.
The C12 splitting cylinder is particularly suitable for rock demolition and secondary crushing of boulders. Through multiple splits, the structure of a full-surface rock surface or rock area can be weakened and the rock can then be easily removed. In the natural stone industry, it is used for block extraction of hard rock, as well as in tunnel driving and for expansion work in underground mining.
The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
DARDA - C12W
Splitting force: 321 tones
Drill hole Ø : 45 - 48 mm
Drill depth : 550 mm
Bar pressure : 500 bar
Weight : 31 kg
Accurately controllable at any time
Darda largest handheld cylinder model is the world's most powerful splitting device in relation to its size. The C12 splitting cylinder breaks reinforced, lightweight and unreinforced concrete equally reliably and is particularly suitable for topping concrete piles and demolishing walls and walls.
The C12 splitting cylinder is particularly suitable for rock demolition and secondary crushing of boulders. Through multiple splits, the structure of a full-surface rock surface or rock area can be weakened and the rock can then be easily removed. In the natural stone industry, it is used for block extraction of hard rock, as well as in tunnel driving and for expansion work in underground mining.
The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water while other work continues in parallel: low noise, without vibrations and flying stones.
Complete Splitting Unit
consists of three components:
1. Hydraulic Splitter
2. Hydraulic Power Unit
3. Hydraulic hose set (high and low pressure)
Hydraulic Units can be combined with all Splitting Cylinder Types !
The high-pressure hydraulic units are Darda power source and the ideal companion for Darda handheld stone and concrete splitting devices, as well as combination shears. Robust, lightweight and compact, with 500 bar system pressure they represent a unique compromise between user-friendliness, reliability and efficiency. Available in four different power systems - portable or mobile - each drive type offers maximum power and safety for the machine and operating personnel and is designed for tough operating conditions. Depending on your requirements and demands, you will find the right solution here!
AP2 - Hydraulic Unit
Weight : 40 kg
Drive type : Compressed air
Displacement volume low pressure stage : 5 l/min
Delivery volume high pressure stage : 1.6 l/min
Oil tank capacity : 5 litres
Safe High Pressure
With the portable compressed air high-pressure hydraulic unit AP2 you can work even in sensitive areas where electric and combustion engines are prohibited.
It is very compact and fits in any car or van. Light and handy, it supplies the Darda handheld demolition equipment with a system pressure of 500 bar.
The robust air motor, equipped with a silencer, has a maintenance unit that ensures the functional reliability and a long service life of the unit. With the pre-assembled distributor, up to 3 devices can be connected and operated
in parallel. Integrated wheels and an extendable handlebar make it easy to transport within the building.
Optional ergonomic carrying aids also make it easier for two people to transport the device. The compressed air-operated high-pressure hydraulic unit is used in sensitive areas where electric and combustion engines are prohibited.
BP2 - Hydraulic Unit
Weight : 45 kg
Drive type : Petrol
Displacement volume low pressure stage : 5 l/min
Delivery volume high pressure stage : 1.6 l/min
Oil tank capacity : 5 litres
Independent High Pressure
With the portable BP2 petrol high-pressure hydraulic unit, you are always ready for use quickly and independent of other sources of power.
It is very compact and therefore fits well in the car or van. Light and handy, it supplies the Darda handheld demolition equipment with a system pressure
of 500 bar.
The Honda Professional engine is characterized by very low fuel consumption. With the pre-assembled distributor, up to 3 devices can be connected and operated in parallel. Integrated wheels and an extendable handlebar make transport within the building easier. Optional ergonomic carrying aids also make transport for 2 people easier.
The petrol-powered high-pressure hydraulic unit is EPA and CARB certified and is equally popular with demolition contractors and rental companies.
EP3 - Hydraulic Unit
Weight : 55 kg
Drive type : Electric
Displacement volume low pressure stage : 5 l/min
Delivery volume high pressure stage : 1.6 l/min
Oil tank capacity : 5 litres
SEP3 230 V / 400 V – Emission-Free High Pressure up to 500 bar
By combining the two most common electrical connection types, 230 V and 400 V, in one device, the EP3 offers maximum application possibilities.
The type of connection used can be selected using a selector switch. The EP3 is 100% emission-free and is therefore particularly suitable for use indoors. Even the future, more stringent health and safety requirements for exhaust gases and noise can be met. The EP3 is the reliable solution for all areas in which conventional petrol or diesel units are prohibited due to their exhaust emissions.
Darda electrically driven high-pressure unit has two parallel overpressure protection systems. A two-stage pump enables rapid pressure build-up on the connected tool, thereby improving its productivity. Up to 3 devices can optionally be connected to the pre-assembled distributor and operated in parallel. Integrated wheels and an extendable handlebar make it easier to transport within the building.
Suitable suspension eyes are located on the unit for uncomplicated crane transport using a "4-strand sling chain". The clad steel frame ensures the
unit's compactness and optimal protection in rough working conditions. The tools required to use the hydraulic end devices are kept safe in integrated storage box. Robustly designed for tough use in demolition work, the EP3 supplies Darda's handheld demolition equipment with a system pressure of 500 bar. The compact dimensions enable uncomplicated transport to the site.
D4 - Hydraulic Unit
Weight : 137 kg
Weight with electric starter : 156 kg
Drive type : Diesel
Delivery volume high pressure stage : 5.4 l/min
Oil tank capacity : 10 litres
Reliable Safe High Pressure
With the mobile diesel high-pressure hydraulic unit D4, you are quickly ready for operation at any time and independent of other power sources.
This model is for areas where electric or petrol engines are not permitted and where you need a unit that can run continuously for many hours without interruption.
Equipped with a manual start as standard, but also available with an electric start, an optional distributor allows up to 5 stone and concrete splitters to be connected and operated in parallel. It reliably supplies the Darda handheld demolition equipment with a system pressure of 500 bar. The side mounts on the robust and tip-proof steel frame enable the equipment to be transported without any problems, also thanks to the large pneumatic tires. The diesel-powered high-pressure hydraulic unit is certified according to EU 2016/1628 Level 5 and is the ideal companion for daily use, especially in natural stone extraction.
